Up The Entrance Benches/Tools Drop Saw Bench Table Saw Router Table Wall Saw Sanders Jointer/Bandsaw Drum Sander Lathe Drill/Mortiser Up

And this is my Carbatec MC900 Lathe.  Not the best but it gets the job done.
I built a Shelf and Chip Deflectors on/under the Lathe. Also finally put some temporary Dust Collection in place which is hooked up the the Cyclone.
This is actually working quite well for the pen turning I am doing but I will need to do something better when I start to turn larger/longer items.
 

My Shop (and this site) are always  undr_kunstrukson_md_wht.gif (11032 bytes) Hard Hats required!

Up The Entrance Benches/Tools Drop Saw Bench Table Saw Router Table Wall Saw Sanders Jointer/Bandsaw Drum Sander Lathe Drill/Mortiser Up